爱博体育分析,官网,官方网站,官方网址

<var id="h5zr9"></var>

<dfn id="h5zr9"></dfn>
<dfn id="h5zr9"></dfn>

<dfn id="h5zr9"><noframes id="h5zr9"><track id="h5zr9"></track>
      <dfn id="h5zr9"><dl id="h5zr9"></dl></dfn>

    公司首页 新闻动态 产品展示 产品报价 技术文章 在线联系 联系方式
     
     
    技术文章
    SW14025 SW14035 SW14045 SW14015 无铅吸锡线成份报告
    发布日期:[2012-10-24] 共阅[1181]次

    CHEMTRONICS
    ?
    MSDS #1404
    Page 1 of 2
    SECTION 1: CHEMICAL PRODUCT AND COMPANY INFORMATION
    Company Address:
    8125 Cobb Center Drive
    Kennesaw, GA 30152
    Product Information: 800-TECH-401 Emergency: (Chemtrec)
    Customer Service: Revision Date: February 23, 2005
    Product Identification
    SODER-WICK? LEAD-FREE SD
    Product Code: 40 Series
    SECTION 2: COMPOSITION, INFORMATION ON INGREDIENTS
    Product Ingredient Information CAS# Wt. % Range
    Copper 7440-50-8 98.0-99.0
    Rosin 8050-09-7 1.0-2.0
    SECTION 3: HAZARD IDENTIFICATION
    Emergency Overview: Shiny, braided copper wire. This product is nonflammable.
    Potential Health Effects:
    Eyes: No effect expected under normal conditions of use. Vapors released from other materials used in the desoldering process may cause eye irritation.
    Skin: Prolonged contact may cause skin irritation.
    Ingestion: Harmful if swallowed. Metal contact may be irritating to mouth, throat and stomach tissues.
    Inhalation: No effects expected under normal conditions of use. Vapors from other materials used in the desoldering process may cause irritation of the mouth, nose
    and throat.
    Pre-Existing Medical Conditions Aggravated by Exposure: None known.
    SECTION 4: FIRST AID MEASURES
    Eyes: Usually not required. If eye irritation occurs immediay flush with plenty of water. After initial flushing , remove any contact lenses and continue flushing
    for at least 15 minutes. Have eyes examined and tested by medical personnel if irritation develops or persists.
    Skin: Usually not required . If skin irritation occurs wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops
    or persist. Wash clothing separay before reuse.
    Ingestion: Do not induce vomiting. Get immediate medical attention.
    Inhalation: If user is overcome by fumes during the desoldering process, remove victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult,
    give oxygen. Get medical attention.
    SECTION 5: FIRE FIGHTING MEASURES
    Flash Point: Nonflammable LEL/UEL: Not applicable
    Extinguishing Media: Water fog, CO2, dry chemical, foam are compatible for extinguishing fires involving other materials when Soder-Wick is present.
    Fire Fighting Instructions: As in any fire, wear self-contained breathing apparatus (pressure-demand, MSHA/NIOSH approved or equivalent) and full protective gear.
    SECTION 6: ACCIDENTAL RELEASE MEASURES
    Small Spills: Pick up spilled braid. If soiled or dirty store in a closed container for delivery to a metals recycling center. Do not dispose of by placing in trash.
    SECTION 7: HANDLING AND STORAGE
    Avoid prolonged or repeated contact with eyes, skin. Wash hands before eating. Use with adequate ventilation. Avoid breathing vapors given off by he desoldering
    process. Store in a cool dry place. Keep container closed when not in use. KEEP OUT OF REACH OF CHILDREN.
    SECTION 8: EXPOSURE CONTROLS/PERSONNEL PROTECTION
    Exposure Guidelines:
    CHEMICAL NAME ACGIH TLV OSHA PEL ACGIH S
    Copper 0.2 mg/m3 1.0 mg/m3 NA
    Rosin NA NA NA
    Work/Hygienic Practices: Good general ventilation should be sufficient to control airborne levels of desoldering process vapors. Local exhaust ventilation may be
    necessary to control any air contaminants to within their TLVs during the use of this product. Wear safety glasses with side shields or goggles when using this product.
    NFPA and HMIS Codes: NFPA HMIS
    Health 1 1
    Flammability 0 0
    Reactivity 0 0
    Personal Protection - -
    SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
    Physical State: Rosin coated braided copper wire Solubility in Water: Insoluble
    Odor: Mild Specific Gravity: NA
    pH: NA Evaporation Rate: NA
    Vapor Pressure: NA Viscosity: NA
    Vapor Density: NA Percent Volatile: NA
    Color: Copper metallic Boiling Point: NA
    CHEMTRONICS
    ?
    MSDS #1404
    Page 2 of 2
    SECTION 10: STABILITY AND REACTIVITY
    Stability - This product is stable. Conditions to Avoid: None known
    Incompatibility: Do not mix with powdered alkali and alkaline earth metals or strong oxidizing agents.
    Products of Decomposition: Carbon dioxide, carbon monoxide.
    Hazardous Polymerization: Will not occur
    Conditions to Avoid: NA
    SECTION 11: TOXICOLOGICAL INFORMATION
    Inhalation:
    Inhalation of dust and fumes during desoldering can irritate the respiratory tract.
    Ingestion:
    Not expected to be a route of exposure.
    Skin:
    May cause allergic skin reaction in some individuals.
    Eye:
    Contact with rosin dust and desoldering fumes can irritate the eyes.
    Cancer Information: No ingredients listed as human carcinogens by NTP or IARC
    Reproductive effects: none Teratogenic effects: none Mutagenic effects: none
    SECTION 12: ECOLOGICAL INFORMATION
    Environmental Impact Information
    Avoid runoff into storm sewers and ditches which lead to waterways. Water runoff of desoldering process residues may cause environmental damage.
    REPORTING
    US regulations require reporting spills of this material that could reach any surface waters. The toll free number for the US Coast Guard National Response Center is:
    1-
    SECTION 13: DISPOSAL CONSIDERATIONS
    Dispose of in accordance with all federal, state and local regulations.
    SECTION 14: TRANSPORTATION INFORMATION
    Proper
    Shipping Name
    Air: Wire Not regulated
    Ground: Wire Not regulated
    SECTION 15: REGULATORY INFORMATION
    SECTION 313 SUPPLIER NOTIFICATION
    This product contains the following toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-To-Know
    Act of 1986 (40 CFR 372).
    Chemical Name CAS# Wt. % Range
    Copper 7440-50-8 98.0-99.0
    This information should be included on all MSDSs copied and distributed for this material.
    TOXIC SUBSTANCES CONTROL ACT (TSCA).
    All ingredients of this product are listed on the TSCA Inventory.
    WHMIS: Not hazardous. This product has been classified according to the hazard criteria of the CPR and the MSDS contains all of the information required by the
    CPR.
    SECTION 16: OTHER INFORMATION
    Product should be used only with adequate ventilation to remove vapors produced during the desoldering process. Mechanical ventilation should be used when large
    amounts of fumes are produced.
    To the best of our knowledge, the information contained herein is accurate. However, all materials may present unknown hazards and should be used with caution. In
    particular, improper use of our products and their inappropriate combination with other products and substances may produce harmful results which cannot be
    anticipated. Final determination of the suitability of any material is the sole responsibility of the user. Although certain hazards are described herein, we cannot
    guarantee that these are the only hazards that may exist.

    公司简介|产品展示|产品报价|技术文章|在线联系|联系方式
    上海誉星电子有限公司 版权所有 GoogleSitemap 网址:www.dpdr.tw 技术支持:中国化工仪器网 管理登陆 ICP备案号:沪ICP备12017820号-2
    主营产品: 五金 焊接 防静电 仪器仪表 劳保防护 电气动工具等
    021-36538920
    021-60519961
    13818843861
    13917560309
    15021751140
    王超海
    李全
    王超海

    中国化工仪器网

    中级会员

    中级会员

    7

    推荐收藏该企业网站

    Sitemap

    手机时时彩平台大全| 菲特时时彩平台| vinbet浩博平台|